Suspended lamp in Bendywood®-beech:
The curved parts of the lamp are composed of 2 layers of saw-cut veneer in Bendywood®-beech: 3 mm thick and 60 mm wide.

The height of the lamp is 310 mm and its diameter below ø420 mm.
The octagonal wood capping at the top of the lamp has a diameter of 180 mm.

Material requirements:

• 2 pcs. fine-cut veneer REC-3 in Bendywood®-beech; 1,65 m long, 100 mm wide and 3 mm thick
• 16 pcs. fine-cut veneer REC-3 in Bendywood®-beech; 0,5 m long, 100 mm wide and 3 mm thick
• Octagon in normal wood: 150x150x40 mm
• Octagonal capping in normal wood: 180x180x45 mm

Total cost of Bendywood® material: about 70 euros.